How wide is a 2 post car lift, and how much weight can it lift? These are common questions that people have, but not all lifts are created equally. Consider Mechanic Superstore’s offering the lifting capacity, flexibility, and cost of a lift before making a decision. The following table lists a few common models of two-post car lifts, and their capacities.

Flexibility

A two post car lift is a versatile tool for a variety of tasks. Typically, these lifts have two posts on either side of the vehicle, and two lifting arms that extend out from the posts and sit on a frame underneath the vehicle. These arms then raise the car off the ground. Depending on the configuration, these lifts can handle most vehicles from compact cars to light trucks and small SUVs.

When selecting the correct lift, it is important to know the vehicle's center of gravity. This will allow the lift to properly support the weight of the vehicle. Improperly identifying these points can lead to improper lifting and stability issues. In addition, it is critical to know where to erect the posts to avoid unstable lifts.

Two-post lifts can be either symmetrical or asymmetrical. Symmetrical models have the two posts parallel to each other, while asymmetrical lifts have the posts offset. An asymmetrical design can be easier to use when working on smaller vehicles. The arms may be shorter than the posts at the front, making it easier to get into the car.

Cost

A two-post car lift is usually the most appropriate type of lift for working on vehicles. This type of lift has two posts on each side and arms that extend out from the posts to raise the vehicle off of the ground. This is a more expensive type of lift, but it can handle wider vehicles.

The price of a two-post car lift can range from around $2,000 to $3,500. It costs about the same as a lower capacity four-post auto lift, though you may pay a few hundred dollars more for the higher capacity model. Additionally, the price will depend on whether you plan to use the lift for stacking cars, repairing cars, or servicing vehicles.

Depending on how much space you have available in your garage, a 2 post car lift may be a good solution. The Universalift 7000-pound capacity is plenty for most cars, but is not suitable for larger vehicles such as vans, lift trucks, or buses.

Column height

The height of the column on a two post car lift depends on a number of factors, including how much garage space you have available. If you have unlimited space, there are no limitations on installation, but you will want to ensure that the ceiling is high enough and that there is enough space in front of the columns.

The CLFP9 two post car lift features a 10-foot overall column height, making it an ideal choice for low ceilings. The lift's 3-stage arms provide the maximum reach, sweep, and retraction. It also accommodates a wide range of vehicles, including imports and short and long wheelbase vehicles.

The height of a two-post car lift can be adjusted to accommodate a wide range of vehicles. The lower pad height allows the lift arms to be positioned under most small cars and light pick-up trucks. This allows the operator to use a single unit for two vehicles, and can be used with either a standard or rotated column configuration. This model is ALI/ETL certified and has a one-year limited warranty.

Lifting capacity

When choosing a car lift, you need to consider the weight capacity of the vehicle that you intend to lift. Some models are capable of lifting up to 30,000 pounds, while others are limited to 6,000 pounds. Most two-post lifts are designed to hold a small number of cars, but they will not work well for large commercial vehicles, such as buses.

The weight capacity of a lift depends on its strength and size. The number of columns and cylinders determine its strength. Another factor is the height of the lift. This is especially important if you intend to perform undercar repairs. For example, a four-foot height is best for body and wheel work.

A four-post car lift is more versatile and is built to handle heavier loads. Its four-post design provides more stability and supports more weight, making it safer for both operators and vehicles. This type of lift is used in a variety of industries, including the airline industry and the power generation sector.